CKE6150Z Dalian DMTG Horizontal Flat Bed Economic CNC Lathe Machine
1. Construction casting molded with resin sand of bed, headstock, saddle plinth, ect;
2. Turcite-B coated on mating surfaces between saddle and guideways;
3. Precision ballscrew, high rigidity precision compound bearings ensure accurate positioning and efficient driving of cnc lathe. Centralized oil lubricator providing forced automatic lubrication onto ballscrew, mating surfaces;
4. High spindle speed with wide variable speed ranges. Low noise 80db, CKE-Zseries cnc lathe machine adopting the smart automatic gear changing mechanism enables automatic speed changes among low, medium, high speed ranges without turning off the cnc lathe machine. CKE-i series cnc lathe machine with independent spindle strcture and frequency converted motor or servo motor enables high spindle speed and stepless spindle changing;
5. Flexible control panel enables convenient tool setting for the cnc lathe;
6. Popular full enclosed guards with interlock offer a waterproof and chip-free environment;
7. Vertical 4-position toolpost, horizontal 6-position toolpost, quick change toolpost, etc are available for your selection for this cnc lathe machine;
8. Optional, pneumatic, hydraulic chuck and tailstock are available for this cnc lathe machine;
9. FANUC, SIEMENS, etc control systems can be appointed E-handwheel function can also be equipped.
Capacities | Metric |
Maximum Swing Over Bed | 500mm |
Width of Bed | 400mm |
Maximum Swing Over Cross Slide | 280mm |
Maximum Workpiece Length | 750/1000/1500/2000mm |
Travel | Metric |
X Axis | 280mm |
Z Axis | 680/930/1430/1930mm |
Spindle | Metric |
Chuck Size | 250mm |
Spindle Through Bore | 82mm |
Spindle Nose | D8 |
Spindle Speed Steps | 3 |
Spindle Speed Range 1 | 7 – 135rpm |
Spindle Speed Range 2 | 30 – 550rpm |
Spindle Speed Range 3 | 110 – 2200rpm |
Spindle Motor Power | 7.5kw |
Tool Post (Standard) | Metric |
Number of Tool Stations | 4 |
Axis | Vertical |
Index Time (Adjacent Tool) | 2.4 s |
Tool Post (Optional) | |
Number of Tool Stations | 6 |
Axis | Horizontal |
Index Time (Adjacent Tool) | 3 s |
Accuracy | Metric |
Positioning Accuracy, X axis (JIS) | 0.0112mm |
Positioning Accuracy, Z axis (JIS) | 0.0147mm |
Repeatability, X axis (JIS) | 0.0043mm |
Repeatability, Z axis (JIS) | 0.0058mm |
Repeatability of Tool Post (VDI) | 0.008mm |
Rapid Traverse Rates | Metric |
X Axis | 6m/min |
Z Axis | 10/min |
Tailstock | Metric |
Quill Diameter | 75mm |
Quill Travel | 150mm |
Quill Inside Taper | MT5 |
Machine Dimensions | Metric |
Machine Length | 2580/2830/3330/3830mm |
Machine Width | 1750mm |
Machine Height | 1620mm |
Total Weight | 2550/2600/2700/2800 kg |
Power Requirements | 24KVA |
Door interlock |
Chuck guard with switch |
CE electrics |
Electric Hand wheel (Two) and manual start-up joystick |
Horizontal 6-Station Turret on CKE6150 |
Horizontal 8-Station Turret on CKE6150 |
Taiwan 250mm hydraulic chuck (through-hole) |
Hydraulic tailstock for CKE6150 |
Hydraulic station for CKE6150 |
Steady rest Dia:100-200mm |
Live Center M5 for CKE6150 |
Anti-vibration pads (1 set) |
Germany type quick change toolpost to replace standard 4 station electric turret |
Quality is our forte and we have clients spreading all over the world. We are committed to a well-defined and self-framed quality policy. The policy revolves around through and repeated checking of the cnc lathe machine. We are the regular exporters of our products throughout Asia, Africa and several European countries. Our after-sales service terms and conditions as follows:
The cnc lathe machines are tested and have trial production in our factory before leaving our factory and they are shipped out only after the customers are satisfied with them.
When the cnc lathe machines are tested, our technicians will train the customers’ technicians in theory and practice till they grasp the skills.
During this period of one year warranty , if the cnc lathe machines were damaged by non-artificial reasons, we are responsible for repairing or changing parts.
During this period of warranty, if there is something wrong with the cnc lathe machine, we are responsible to provide project for solving this problem at the soonest, and help customers to restore production as soon as possible.
After the warranty, we charge only cost price for maintaining the cnc lathe machines within three years.
Other after-sale terms can be agreed by buyer and seller in addition.